Global Automotive 48V System Market Size By Vehicle Type (Entry, Mid And Premium), By Architecture Type (Transmission Output Shaft, Belt Driven And Crankshaft Mounted), By Geography Scope And Forecast

Automotive 48V System Market Size And Forecast

The global automotive 48V system market size was valued at USD 17.3 Billion in 2023 and is projected to reach USD 117.2 Billion by 2031, growing at a CAGR of 27% from 2024 to 2031.

• Automotive 48V systems are mild hybrid electric vehicle (MHEV) systems that augment a car’s standard engine with an electric motor and 48-volt battery. When compared to conventional 12V electrical systems, this increases power, decreases emissions, and improves fuel efficiency.
• Stricter emission laws, consumer demand for fuel economy, and their affordability in comparison to fully hybrid or electric cars are the main reasons they’re gaining popularity.
• In the future, new battery technologies should be developed for improved performance and range, closer integration with sophisticated driver-assistance systems, and an emphasis on lightweight materials to optimize fuel efficiency.tighter emission standards are predicted to lead to a greater adoption of these vehicles, and their potential will be further enhanced by continuous developments in battery technology and integration with cutting-edge driver-assistance systems.

To Get Detailed Analysis: Download Report PDF

Global Automotive 48V System Market Dynamics

The key market dynamics that are shaping the global automotive 48v system market include:

Key Market Drivers:

• Stringent Emission Regulations: Stricter laws are being implemented by governments all over the world to reduce automobile carbon emissions. Automakers are being forced by these laws to create more fuel-efficient technologies. Here, 48V systems provide a big benefit. They enable features like regenerative braking and start-stop technology, which lower pollutants and fuel consumption, by supplying extra electric power. This enables automakers to follow rules without compromising functionality.
• Growing Demand for Fuel Efficiency: Increasing customers’ desire for cars that use less gas is being driven by rising gasoline prices and environmental concerns. This demand is met by 48V systems, which have a 15-20% increase in fuel economy over conventional 12V systems. This means that drivers will save a lot of money at the gas pump, which increases the appeal of 48V automobiles.
• Cost-Effectiveness: When compared to fully electric or hybrid vehicles, 48V systems present a more economical means of enhancing fuel efficiency. They do away with the requirement for an intricate and pricey electric drivetrain by using the 48V electric motor in conjunction with the current internal combustion engine. This keeps the car’s total cost down and increases its accessibility for a larger group of buyers.
• Increased Functionality: Growing innovations that improve a vehicle’s performance and driving experience can be adopted thanks to 48V systems. Among these characteristics are: With start-stop technology, less fuel is wasted and idle pollutants are produced when the engine automatically cuts off when the car stops.
• Regenerative Braking: When you brake, your body absorbs kinetic energy and transforms it into electrical energy that is stored in a 48V battery. By helping the engine accelerate, this stored energy can increase fuel economy.
• Electric turbochargers: By eliminating turbo lag, a tiny electric motor increases power delivery’s speed and responsiveness.

Key Challenge:

• Higher Initial Cost: 48V systems are more expensive to install initially than typical 12V systems, despite the fact that they perform better and use less fuel. The 48V battery, electric motor, and power electronics needed for the system’s operation account for the added expense. This may pose a challenge for certain consumers who are cost-conscious.
• Limited Availability of Skilled Labor: In order for 48V systems to be widely used, a workforce equipped to design, develop, and maintain these novel technologies is needed. Because 48V systems operate at a greater voltage than conventional 12V systems, this includes experts who can safely diagnose and repair 48V systems. Training courses and certificates are required to close this skills gap and guarantee 48V vehicle maintenance.
• Standardization Issues: At the moment, there isn’t total commonality across the various 48V system components. Because of this, automakers and suppliers may have to modify their designs to accommodate the particular 48V system components they are utilizing.  Although there are initiatives to standardize, the industry will need some time to develop a cohesive strategy.  Manufacturers may incur higher costs and complexity as a result of this lack of uniformity in the interim.
• Thermal Management: When it comes to operation, 48V systems need more power than 12V systems. This produces extra heat that must be efficiently handled to guarantee the longevity and correct operation of the system’s components.  To solve this problem and avoid overheating, automakers must create effective thermal management systems.

Key Trends:

• Integration with Advanced Driver-Assistance Systems (ADAS): When ADAS capabilities are better integrated with 48V systems, cars’ functionality and safety are greatly increased. Features like Automatic Emergency Braking, which adds more electric force for better stopping power in an emergency, are made possible by the 48V system’s greater power. The 48V system can be used by lane departure warning systems to provide corrective steering torque, which will keep the car in its lane. The additional power also helps Adaptive Cruise Control, which makes for smoother and more accurate acceleration when traveling on the highway. A more complete driver assistance package is produced by this integration, making driving safer and more automated.
• Development of New Battery Technologies: Research is underway to find next-generation batteries that enhance in three crucial areas in order to better optimize 48V systems. By increasing the electric driving range of 48V mild hybrids, new battery chemistries and cell designs hope to increase fuel efficiency. The system’s overall responsiveness and performance are being improved with the development of faster charging times and better power delivery. Lastly, improvements in battery management techniques and materials will allow 48V batteries to last longer between charges, saving money and lessening their environmental effect. Manufacturers and customers will find 48V systems even more appealing as a result of these battery advancements.
• Focus on Lightweight Materials: In order to further increase fuel efficiency, automakers are putting more emphasis on the use of lightweight materials in conjunction with 48V systems. Lighter cars use less energy to move, therefore the 48V system’s fuel-saving advantages are maximized.  Vehicle weight reduction is being investigated for materials such as aluminum, high-strength steel, and carbon fiber composites that don’t sacrifice performance or safety.
• Software Advancements:: Sophisticated software is essential for maximizing 48V systems’ effectiveness and performance. The internal combustion engine, battery, electric motor, and other vehicle systems are all managed by software controls.  The capabilities of 48V systems will be further enhanced by advancements in fields such as motor control algorithms, energy management methods, and thermal management software.

What's inside a VMR
industry report?

Our reports include actionable data and forward-looking analysis that help you craft pitches, create business plans, build presentations and write proposals.

>>> Ask For Discount @ – https://www.verifiedmarketresearch.com/ask-for-discount/?rid=313531

Global Automotive 48V System Market Regional Analysis

Here is a more detailed regional analysis of the global automotive 48V System Market:

North America

• The existence of top automakers such as Ford, General Motors, and Stellantis creates a robust environment for the study, creation, and application of automotive innovations. These businesses can afford to make significant investments in 48V systems and incorporate them into their cars.
• With skills in fields like electronics and software engineering, North America is home to a booming tech industry. This knowledge is translated into cutting-edge software and control systems that maximize the efficiency of 48V systems in automobiles.
• The desire for fuel-efficient automobiles is being driven by rising fuel prices as well as growing environmental concern. For North American consumers, 48V systems are an appealing option since they provide a convincing solution that strikes a balance between performance and fuel economy.

Europe

• European nations are renowned for taking a firm stand on environmental laws. Automakers are being forced by strict pollution restrictions to use technology such as 48V systems, which let them comply with the rules without sacrificing performance.
• The center of automobile innovation is in Europe. Leading companies like Daimler, Volkswagen, and BMW are always pushing the limits of technology. The emphasis on innovation drives developments in 48V systems, increasing their versatility and efficiency.
• The European automobile sector has made significant investments in Industry 4.0, which prioritizes automation and smart production, and digitization projects. In order to make features like advanced driving assistance systems (ADAS) and linked automobile technologies possible, 48V systems are essential to these endeavors.

Asia Pacific

• The Asia-Pacific area is rapidly industrializing, which is driving up demand for automobiles. 48V systems benefit greatly from this strong demand since they provide an affordable means of increasing fuel economy in a wide range of automobiles.
• The governments of several countries in the Asia-Pacific area, especially those of China and South Korea, are aggressively pushing electric vehicle (EV) technology. These governments provide incentives for the adoption of 48V systems, which are considered as a first step toward complete electrification even though they are not entirely electric.
• Investments in IT infrastructure to support the automotive industry are growing. The development and integration of sophisticated technology, such as 48V systems, into automobile designs is made easier by this upgraded infrastructure.

Global Automotive 48V System Market Segmentation Analysis

The Global Automotive 48V System Market is segmented on the basis of Vehicle Class, Architecture, and Geography.

Automotive 48V System Market, By Vehicle Class

• Premium Vehicles
• Mid-Range Vehicles
• Entry-Level Vehicles
• Luxury Vehicles

Based on Vehicle Class, the global automotive 48v system market is segmented into Premium Vehicles Mid-Range Vehicles, Entry-Level Vehicles, and Luxury Vehicles.. The market for automotive 48V systems worldwide is now dominated by the mid-range car class. This is probably because 48V systems balance affordability with the opportunity to gain from their performance boost and fuel efficiency. All segments are anticipated to increase significantly, with a compound annual growth rate (CAGR) in the mid-20s, even though mid-range now occupies the top rank.

Automotive 48V System Market, By Architecture

• Crankshaft Mounted Motors
• Belt Driven Starter Generators
• Integrated Starter Generators
• Transmission Mounted Motors

Based on the Architecture, the global automotive 48v system market is segmented into Crankshaft Mounted Motors, Belt Driven Starter Generators Automotive, Integrated Starter Generators, and Transmission Mounted Motors. In the global automotive 48V system market, belt-driven starter generators (P0) are currently the dominant segment. This is because they are a relatively simple and cost-effective way to add mild hybrid functionality to existing vehicles. The fastest-growing segment is expected to be crankshaft-mounted motors. This is due to their ability to provide higher torque and better fuel efficiency compared to belt-driven starter generator systems.

Automotive 48V System Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the World

On the basis of Geography, the global automotive 48v system markets are classified into North America, Europe, Asia Pacific, and Rest of World. In the global automotive 48V system market, North America is presently leading because of its well-established automakers, technological know-how, and consumer preference for fuel-efficient cars. But because of things like quick industrialization, government backing for electrification, and infrastructural development, the Asia Pacific area is growing at the quickest rate.

Key Players

The “Global Automotive 48V System Market” study report will provide valuable insight with an emphasis on the global market. Major manufacturers like Bosch, Continental AG, Denso Corporation, Valeo, and Magna International are at the forefront of the congested global automotive 48V system market. Asian behemoths like South Korea’s Hyundai Mobis and well-known brands like Germany’s Robert Bosch GmbH are competing with them for market share, as are Japan’s Aisin Seiki Co., Hitachi Automotive Systems, and South Korea’s Samsung SDI.

Key Developments

• In March 2024, A new 48V integrated starter generator (ISG) from Continental AG has been released. Its goal is to increase performance and fuel economy in a larger variety of automobiles.
• In February 2024, A new 48V battery system from Denso Corporation promises a longer lifespan and quicker charging times.
• In January 2024, In order to build a new 48V system that will be utilized in a variety of upcoming electric vehicles, Bosch announced a partnership with a top carmaker.

Report Scope

Research Methodology of Verified Market Research:

To know more about the Research Methodology and other aspects of the research study, kindly get in touch with our Sales Team at Verified Market Research.

Reasons to Purchase this Report

• Qualitative and quantitative analysis of the market based on segmentation involving both economic as well as non-economic factors
• Provision of market value (USD Billion) data for each segment and sub-segment
• Indicates the region and segment that is expected to witness the fastest growth as well as to dominate the market
• Analysis by geography highlighting the consumption of the product/service in the region as well as indicating the factors that are affecting the market within each region
• Competitive landscape which incorporates the market ranking of the major players, along with new service/product launches, partnerships, business expansions, and acquisitions in the past five years of companies profiled
• Extensive company profiles comprising of company overview, company insights, product benchmarking, and SWOT analysis for the major market players
• The current as well as the future market outlook of the industry with respect to recent developments which involve growth opportunities and drivers as well as challenges and restraints of both emerging as well as developed regions
• Includes in-depth analysis of the market of various perspectives through Porter’s five forces analysis
• Provides insight into the market through Value Chain
• Market dynamics scenario, along with growth opportunities of the market in the years to come
• 6-month post-sales analyst support

Customization of the Report

• In case of any Queries or Customization Requirements please connect with our sales team, who will ensure that your requirements are met.